Tattoo Antics

Cordless Power Tools – Pros And Cons

The power tool industry has implemented the thought of cordless power tools in the past decade. They have been incredibly well-liked. Customers appreciate the convenience of being able to use them anywhere with out having to worry about a power supply. It really is also nice not need to worry about the cords being inside your way, in particular when an extension cord was necessary to get it to the correct length.

As most customers are aware, convenience is usually much more pricey. You’ll uncover cordless power tools cost much more than the conventional power tools with cords. A key drawback of cordless power tools is that they do not offer as a lot power as a cord power tool. In quite a few cases the difference in power isn’t enough to be an concern, but for bigger projects it might be a significant concern.

You always know a power tool with a cord is going to work whenever you will need it. That is not often so with a cordless tool. I know on many occasions I have reached for my cordless screwdriver and discovered the charge entirely dead for the reason that I didn’t charge it up. You will must remember greater than I do to recharge your cordless power tools. Although you can very easily recharge the batteries, some power tools have a battery that gets weaker over time. This indicates it won’t hold significantly of a charge. You may choose to purchase a replacement battery at that point.

There’s less of a risk of accidents with a cordless power tool mainly because you do not have to worry about trips and falls because of the cords. You’re also much less likely to be shocked or electrocuted. 1 draw back is that with a cordless power tool an individual else can’t just unplug it if you’re involved in an accident. Make certain any cordless power tool has an quickly accessed on/off switch.

To create the recharge concern less of an inconvenience, some larger power tools such as drills and saws come with two batteries. This is great for keeping 1 within the power tool and also the other charging. It’s quickly and easy to switch the two so you’ll usually have a fully charged battery ready to work with.

The decision to buy a cordless power tool can be a personal one. Some of us love the convenience of them, and we don’t mind paying extra for it. Most of us do not miss the additional power either due to the fact we only use these power tools for home projects. Those who do big project on a normal basis prefer the heavy duty power tools with a cord. That’s fine, which is why the marketplace carries both. It allows customers to create a selection based on what is going to work well for them.

To make that decision, decide what you’re in search of in a power tool. Where are you likely to make use of it? Is there a reliable power source in that location? How much power are you looking for? If it does not matter than make the purchase based on the best price for the power tool you’re trying to find. You can effortlessly compare the differences between a certain power tool model with a cord and with out. You will need to determine if it is worth the expense for the convenience.
About the Author

The InterDIY.co.uk site gives
diy advice
as well as
diy woodwork
information.

How Not To Destroy Your MacBook Power Cord

Cuisinart CFO-3SS Electric Fondue Maker $38.99 Cuisinart(tm) Electric Fondue Set Now fondue is easier than ever. The stick-free Cuisinart(tm) Electric Fondue Set has a heating element built into the base of the pot and a thermostat that adjusts to a wide range of temperature settings. Consumers can prepare chocolate, cheese, broth or oil fundues in this elegant 3-quart brushed stainless pot. As always, Cuisinart makes cleanup easy. The nonstic…

Proctor Silex K2070Y 1 Liter Electric Kettle $11.39 Housed in a smooth, modern-looking design, this 1000-watt electric kettle rapidly boils up to 1 quart of water for coffee, tea, instant soups, and more. The unit features a detachable cord and a nonspill spout for graceful serving, plus a generous handle with a secure grip. Its immersed heating element provides a rapid and quiet heating process, making it ideal for the office, home, or college dor…

Proctor Silex E160BY Fresh Grind Coffee Grinder, White $9.08 Also great for spices. Fresh grind. Retractable corn. Safety on/off button. Stainless steel blades. Performance-tested for durability and reliability. Tested. Proven. Procter Silex grinders are rigorously tested for durability and reliability, so you get perfect coffee grounds, cup after cup. Safety On/Off Button: Won’t operate unless lid is securely in place. Retractable Cord: Winds out of the wa…

More Bass More Boom More Bottom $16.98 …

Bass-Boom-Bottom $15.98 …

Canon PIXMA MP240 All-in-One Photo Printer $65.50 Creates hi-res photos up to 4800 x 1200 color dpi2-picoliter sized color ink droplets produce finely detailed and sharp photosProduces scans up to 1200 dpi with vibrant 48-bit color depth4-in-1 2-in-1 printing places multiple pages on 1 pageCopy or scan thick items that do not lie flat on the platenAuto Photo Fix recognizes the type of scene subject’s face etc. and automatically adopts the optim…

Denise Austin, Signature Series Strength System, Power Cords $6.40 Another system from the best, Denise Austin. This one focuses on creating a strong central core utilizing power cords. Cords can be purchased on Amazon or you can use your own….

Street Asylum [VHS] $9.99 …

Strength Power Cords Video System 2 Beginner to Expert $0.98 Strength Power Cords Video System 2 Beginner to Expert…

Belkin Mini Surge Protector/Dual USB Charger Protect your electronic devices wile traveling….

Champion 25-foot Generator Power Cord $83.99 Intended Use: Generators, power equipment or general household power 10-gauge cable converts 240V Twistlock (L14-30P) to 4-120V outlets (5-20R)Features Weather Guard

PS3 – Power Cord – By Nyko $5.93 Description not available.

Stamina AeroPilates Extra Resistance Double Power Cords $25.99 Your Stamina AeroPilates reformer is easily upgraded to add resistance to your strength training goals. Each cord adds 40 percent more resistance than the original cords that came with your Stamina AeroPilates reformer.

Tripp Lite P022-015 Power Extension Cord $13.99 Tripp Lite P022-015 Power Extension Cord

StarTech.com 10ft 14 AWG Power Cord Extension $15.99 StarTech.com 10ft 14 AWG Power Cord Extension

Danner Floating Pond De-icer with 18-inch Power Cord $39.45 This Danner floating winter pond De-icer by Pondmaster works in colder locations where typical winter temperatures result in significant or long term icing of pond surfaces. This unique doughnut-shaped design maintains an ice free center.

StarTech.com 25 ft Power Cord Extension – NEMA 5-15R to NEMA 5-15P $19.99 StarTech.com 25 ft Power Cord Extension – NEMA 5-15R to NEMA 5-15P

Clover Style Laptop 6-foot Power Cord $8.99 Notebook power cord is a computer essentialClover-style cord measures 6 feet longReplacement power cord is for laptop computers

IBM 9.19ft Standard Power Cord $83.89 IBM 9.19ft Standard Power Cord

StarTech.com 10 ft 14 AWG Computer Power Cord – NEMA5-15P to C13 $14.49 StarTech.com 10 ft 14 AWG Computer Power Cord – NEMA5-15P to C13

Cables To Go 53410 Power Extension Cord – 25 ft – NEMA 5-15P – NEMA 5 $15.99 Cables To Go 53410 Power Extension Cord – 25 ft – NEMA 5-15P – NEMA 5-15R

StarTech.com 10 ft Computer Power Cord Splitter $18.99 Startech Power Y-Splitter Cable

StarTech.com IEC320 C-19 to NEMA L5-20P Power Cord $27.49 Startech PXTL520C198 Standard Power Cord – Black

APC AP8704S Power Extension Cord – 48 – IEC 60320 C13 – IEC 60320 C1 $69 APC AP8704S Power Extension Cord – 48″ – IEC 60320 C13 – IEC 60320 C14

StarTech.com 8 ft Computer Power Cord $23.49 StarTech.com 8 ft Computer Power Cord

Cisco 6ft Standard Power Cord $41.49 Cisco 6ft Standard Power Cord

StarTech.com Standard Power Cord $14.49 Startech.com Standard Power Cord

Tripp Lite P022-025 Power Extension Cord $17.49 Tripp Lite P022-025 Power Extension Cord

Cisco Standard Power Cord $36.99 Cisco Standard Power Cord

Cisco CAB-SPWR-30CM= Standard Power Cord – 11.81 $65.99 Cisco CAB-SPWR-30CM= Standard Power Cord – 11.81″

Fellowes 50ft Hardwired Extension Cord – Orange $43.49 Fellowes 50ft Hardwired Extension Cord – Orange

APC AP8706S Power Extension Cord – 72 – IEC 60320 C13 – IEC 60320 C1 $94.84 APC AP8706S Power Extension Cord – 72″ – IEC 60320 C13 – IEC 60320 C14

Safco Rumba Clamp-on Power Module $55.13 Use this clamp-on power and data module from Safco for tables, desks, audio visual and machine stands, and lecterns. With this non-skid module, you have power and data on your side with two ethernet connections and three grounded power outlets.

Danner Pondmaster 1800-gph Mag Drive Pump $132.76 This Pondmaster magnetic-drive utility pump features an 18-foot power cord for use in large garden fountains, piped statuary, waterfalls, and ponds. This pump highlights an energy efficient, fish safe epoxy encapsulated motor.

Cisco Standard Power Cord $34.35 Cisco Standard Power Cord

ClearSounds Amplified CSC1000 Freedom Phone $106.04 Amplified FreedomTalk phone helps you overcome hearing and vision challengesHearing assistant announces the caller’s number in a clear voice Phone features an oversized, talking keypad that confirms each key you press

Tripp Lite P045-010 Standard Power Cord $23.49 Tripp Lite P045-010 Standard Power Cord

APC Battery Pack Power Extension Cable $88.49 APC Battery Pack Power Extension Cable

Tripp Lite P030-002-5 Standard Power Cord $27.99 Tripp Lite P030-002-5 Standard Power Cord – Black

Fellowes Power Extension Cable $28.49 Fellowes 25ft Indoor/Outdoor Heavy-Duty Extension Cord – Orange

Fellowes Power Extension Cable $22.49 Fellowes Power Extension Cable

Belkin 11-outlet Surge Suppressor $34.99 Belkin 11 Outlet Surge Suppressor

Cisco Right Angle Standard Power Cord $41.99 Cisco Right Angle Standard Power Cord

Cotytech e-Manager Tool $127.99 Cotytech created e-Manager to save desktop space for anywhere you want this multi-function tool. The e-Manager features a slim design and is a powerful partner to make your space more neat and organized.

Garmin Data/Power Cable $25.99 Garmin Data/Power Cable

Tripp Lite P005-006-YW Power Interconnect Cord $19.49 Tripp Lite P005-006-YW Power Interconnect Cord

Tripp Lite P005-006-RD Power Interconnect Cord $19.49 Tripp Lite P005-006-RD Power Interconnect Cord

Tripp Lite P018-006 Power Interconnect Cord $24.99 Tripp Lite P018-006 Power Interconnect Cord

Tripp Lite P005-006-GN Power Interconnect Cord $19.49 Tripp Lite P005-006-GN Power Interconnect Cord

Tripp Lite P005-18N Power Interconnect Cord $13.99 Tripp Lite P005-18N Power Interconnect Cord

Tripp Lite P018-003 Power Interconnect Cord $21.49 Tripp Lite P018-003 Power Interconnect Cord

CHI Air Texture Tourmaline Ceramic 1.5-inch Curling Iron $57.99 The CHI Air Texture tourmaline ceramic curling iron utilizes the latest innovative technology combining tourmaline ceramic with even heat distribution. Hair is left smooth and silky with an unparalleled shine after using this ceramic curling iron.

CHI Air Expert Classic Variable Temperature Tourmaline Ceramic 1-inch Flat Iron $99.99 The CHI Air classic tourmaline ceramic flat iron utilizes the latest innovative technology combining tourmaline ceramic with even heat distribution. Hair is left smooth and silky with an unparalleled shine after using this ceramic flat iron.

CHI Air Texture Tourmaline Ceramic 1-inch Curling Iron $59.99 The CHI Air Texture tourmaline ceramic curling iron utilizes the latest innovative technology combining tourmaline ceramic with even heat distribution. Hair is left smooth and silky with an unparalleled shine after using this ceramic curling iron.

CHI Air Expert Classic Variable Temperature Pink 1-inch Ceramic Flat Iron $99.99 Use your imagination and create your own personal hair flair with this CHI ceramic flat iron. Using the latest innovative technology, this ceramic flat iron will give even heat distribution for healthier hair.

Cisco AC Power Cord Europe $86.85 Ac Power Cord Europe Cisco Cabl

PS3 – Power Cord – By Nyko $5.93 Power Cord PS3. Same reliable features as PS3 power cable. 9' cord allows for easy installation in any home theater setup. UL and ROHS compliant.

Cisco Standard Power Cord $37.49 Manufacturer: Cisco Systems, Inc Manufacturer Part Number: CAB-N5K6A-NA= Manufacturer Website Address: www.cisco.com Brand Name: Cisco Product Name: Standard Power Cord Product Type: Standard Power Cord

StarTech.com Standard Power Cord $14.49 This Standard Power Cord is a compact C19 to C20 computer cord that is designed to work with racks and Power Distribution Units. Expertly designed for longevity, and is constructed of only the highest quality of materials. Manufacturer: StarTech.com Manufacturer Part Number: PXTC19C206 Manufacturer Website Address: www.startech.com Brand Name: StarTech.com Product Name: Standard Power Cord Product Type: Standard Power Cord Technical Information: Device Supported: PDU Green Compliant: Yes Green Compliance Certificate/Authority: RoHS

IBM 9.19ft Standard Power Cord $88.49 Manufacturer: IBM Corporation Manufacturer Part Number: 25R5785 Manufacturer Website Address: www.ibm.com Brand Name: IBM Product Name: 9.19ft Standard Power Cord Product Type: Standard Power Cord

Cisco CAB-3KX-AC= Standard Power Cord $37.49 Manufacturer: Cisco Systems, Inc Manufacturer Part Number: CAB-3KX-AC= Manufacturer Website Address: www.cisco.com Brand Name: Cisco Product Model: CAB-3KX-AC= Product Name: CAB-3KX-AC= Standard Power Cord Product Type: Standard Power Cord Technical Information: Device Supported: Network Switch

Cisco 6ft Standard Power Cord $84.81 Manufacturer: Cisco Systems, Inc Manufacturer Part Number: CAB-AC= Manufacturer Website Address: www.cisco.com Brand Name: Cisco Product Name: Standard Power Cord Package Type: Retail Product Type: Standard Power Cord

Champion 25-foot Generator Power Cord $83.99 Electrical Generator Power Cord reaches 25 feet Intended Use: Generators, power equipment or general household power 10-gauge cable converts 240V Twistlock (L14-30P) to 4-120V outlets (5-20R)Features Weather GuardCARB CompliantMaterials: PlasticModel No.: 48036Watts: 7500 watts

StarTech.com 10 ft Computer Power Cord Splitter $18.99 This 10ft Universal Computer Power Cord Y cable provides one C14 power connector and two C13 power connections, allowing two devices to share one power port connection to free up space on your power strip, surge protector, or wall outlet. Great for computers, monitors, or printers, this Universal Computer Power Cord Y cable (IEC320 C14 to 2x IEC320 C13) is backed by our Lifetime Warranty. Manufacturer: StarTech.com Manufacturer Part Number: PXT100Y Manufacturer Website Address: www.startech.com Brand Name: StarTech.com Product Name: 10 ft Computer Power Cord Splitter Product Type: Splitter Cord Green Compliant: Yes Green Compliance Certificate/Authority: RoHS

StarTech.com 10ft 14 AWG Power Cord Extension $16.49 14AWG Higher power handling power cord extension. The PAC1011410 Computer Power Cord Extension Cable features a heavy gauge wire (14 AWG) that is suitable for handling high power loads, making it a reliable solution for connecting larger servers to PDU (Power Distribution Units). This 10ft power extension cable extends your existing power connection by 10ft, enabling you to use the PC or another powered device at a greater distance from the power source/outlet. This high quality replacement Power Extension Cord is backed by our Lifetime Warranty. Manufacturer: StarTech.com Manufacturer Part Number: PAC1011410 Manufacturer Website Address: www.startech.com Brand Name: StarTech.com Product Name: 10ft 14 AWG Power Cord Extension Product Type: Power Extension Cord Technical Information: Device Supported: Server Green Compliant: Yes Green Compliance Certificate/Authority: RoHS Warranty: Standard Warranty: Lifetime

Cisco Right Angle Standard Power Cord $85.83 Manufacturer: Cisco Systems, Inc Manufacturer Part Number: CAB-AC-RA Manufacturer Website Address: www.cisco.com Brand Name: Cisco Product Name: Right Angle Standard Power Cord Product Type: Standard Power Cord

Tripp Lite P022-025 Power Extension Cord $19.99 Tripp Lites P022-025 Power Extension Cord allows you to connect to an existing power cable to extend its length an additional 25ft. Features a NEMA 5-15R receptacle and a NEMA 5-15P plug. Constructed of 16AWG wire, the cable is rated 13AMP, 120Volts. Tripp Lite warrants this product to be free from defects in material and workmanship for life. Manufacturer: Tripp Lite Manufacturer Part Number: P022-025 Manufacturer Website Address: www.tripplite.com Brand Name: Tripp Lite Product Model: P022-025 Product Name: P022-025 Power Extension Cord Product Type: Power Extension Cord Green Compliant: Yes Green Compliance Certificate/Authority: RoHS Warranty: Standard Warranty: Lifetime Limited

0.33 HP Submersible Sump Pump $126.99 BSW1010: Features: -Sump pump. -Efficient permanent split capacitor motor (PSC). -Dual seals to protect the motor. -Upper and lower ball bearings. -Water-cooled, no oil to leak. -Thermally protected. -Vertical discharge provides narrow footprint to fit in sump pits as small as 7 in diameter. -Built in air relief vent. -Assembly required. -Three year limited warranty. Specifications: -Pump capacity: 3600 GPH (2600 GPH at 120 lift). -Output: 0.33 HP. -Power cord depth: 120 . -Dimensions: 10.75 H x 6.25 W x 6.25 D.

04949 6 Outlet Smart Strip – Coleman Cable Systems, Inc. $18.69 6 outlet smart strip. Features 6 transformer spaced outlets and provides automatic power control as well as superior surge protection. 3′ cord. 2250 joules. Reduces energy consumption and pays for itself in just a few months.

082660 Vacuum (Canister, Bagless, HEPA) $119.95 DEI1008: The powerful dirtdevil vision canister comes with a 12 amp motor and is lightweight, so its easy to manuever and transport between floors. The hassle free turbo floor tool easily picks up pet hair and other stubborn surface debris. Comes with patented bagless technology, you will never buy bags again. The HEPA filtration system traps over 99.9 percent of dust and allergens in your home. Features: -Vacuum cleaner. -Lightweight canister vacuum. -Patented bagless technology – you will never buy bags again. -HEPA filtration system traps Over 99.9 percent of dust and allergens in your home. -Floor brush included – won’t scratch bare floors. -Bagless. -Automatic cord rewind. -Variable power control. -31 Telescoping metal wand extends to 42.5 . -Included accessories: -Upholstery tool. -Crevice tool. -Dusting brush. -Turbo power hand brush. -Floor nozzle. -Carpet nozzle. . -Assembly required. Specifications: -Motor amps: 12. -Dirt Devil provides 2 years warranty on parts and motor. -Cord length: 20′. -Overall dimensions: 36 H x 12 W x 19 D.

1 Cordless SDS Hammer $861.98 DEWALT exclusive NANO phosphate Lithium-Ion cells offer long battery life and durability (up to 2,000 recharges). Variable speed, reversing switch delivers versatility in all applications. Factory-set clutch reduces sudden, high torque reactions if bit jams. Electro-pneumatic hammer mechanism for fast penetration and low vibration. 360 side handle for better control and ease-of-use in tight spaces. SHOCKS Active Vibration Control significantly reduces vibration and increases user comfort and productivity. Compact L-shape design allows access in tight spaces while providing optimal balance for the user. 2.0 ft-lbs. impact energy provides corded power without the cord. Anti-slip comfort grip provides increased comfort and control. Dual modes of hammer drill and drill for increased versatility. DEWALT built high torque, high efficiency motor delivers maximum performance in all drilling applications. DEWALT exclusive NANO phosphate Lithium-Ion cells offer long battery life and durability (up to 2,000 recharges). Includes: 28V Cordless NANO 1 SDS Rotary Hammer Kit – DC228KL, (2) 28 Volt Cordless NANO Phosphate Lithium-Ion Batteries, 1-Hour Charger, 360 Side Handle, Depth Rod, Kit Box.

1 HP 115 Volt 1 Speed Center Discharge Waterway Spa / Hot Tub Pump 1.5 Plumbing # C10115SS $179.92 PLEASE READ: There is no industry standard for Unions. The various brands have their own unique style, which means you must use the unions provided with our spa pump. This will most likely involve cutting off your old unions and installing the new ones shipped with the spa pump. If your heater is directly coupled to the spa wet end, then our pump will probably not work as the union will most likely be different. Be sure to look at the motor voltage, not the voltage supplied to the spa to determine the correct pump voltage. When removing power cord from existing pump we recommend you mark your wires for common , High speed , low speed . The pump does not come with a power cord. The connection diagram for the new pump is located on the motor name plate. The wet ends can be rotated by simply loosening the motor thru bolts and turning the pump head, allowing the discharge to point to 3 O’clock, 9 O’clock or 6 O’clock. Not Self Priming – Water must be above pump head in order to op

1 HP 115 Volt 2 Speed Center Discharge Waterway Spa / Hot Tub Pump 1.5 Plumbing # C10115 $218.22 PLEASE READ: There is no industry standard for Unions. The various brands have their own unique style, which means you must use the unions provided with our spa pump. This will most likely involve cutting off your old unions and installing the new ones shipped with the spa pump. If your heater is directly coupled to the spa wet end, then our pump will probably not work as the union will most likely be different. Be sure to look at the motor voltage, not the voltage supplied to the spa to determine the correct pump voltage. When removing power cord from existing pump we recommend you mark your wires for common , High speed , low speed . The pump does not come with a power cord. The connection diagram for the new pump is located on the motor name plate. The wet ends can be rotated by simply loosening the motor thru bolts and turning the pump head, allowing the discharge to point to 3 O’clock, 9 O’clock or 6 O’clock. Not Self Priming – Water must be above pump head in order to op

1 HP 115 Volt 2 Speed Side Discharge Waterway Spa / Hot Tub Pump 1.5 Plumbing # S10115 $218.22 PLEASE READ: There is no industry standard for Unions. The various brands have their own unique style, which means you must use the unions provided with our spa pump. This will most likely involve cutting off your old unions and installing the new ones shipped with the spa pump. If your heater is directly coupled to the spa wet end, then our pump will probably not work as the union will most likely be different. Be sure to look at the motor voltage, not the voltage supplied to the spa to determine the correct pump voltage. When removing power cord from existing pump we recommend you mark your wires for common , High speed , low speed . The pump does not come with a power cord. The connection diagram for the new pump is located on the motor name plate. The wet ends can be rotated by simply loosening the motor thru bolts and turning the pump head, allowing the discharge to point to 3 O’clock, 9 O’clock or 6 O’clock. Not Self Priming – Water must be above pump head in order to op

1 HP 2-Speed 3450/1725 RPM, 115 volts Above Ground Pool Pump – Waterway brand – With large Debris Basket & Power Cord # PH2100-6 $199.95 Waterway Above Ground Pool Pumps are manufactured in Oxnard, California. The pump has a large 6 debris basket. It is connected to the pump housing with a union nut, this makes it easy if you need to rotated the head, as the basket can be remounted with no problem once you have rotated the head. Motor is supplied by AO Smith, an industry leader in pool pump motors. Pumps come with a 6 long power cord, with the standard 3 prong plug. This pump is ready to go when you receive it. Simply remove the pump from the box, open the cover on the debris basket, where you will find the gasket that needs to be inserted into the basket nut and then simply install the basket on the face of the pump. Reinstall your hoses from your old pump, connect them to the pool filter and simply plug in the pump. Of course be sure the pump is full of water before you power up the pump so that you do not burn up the pump shaft seal. Pump has a 3 year manufacture warranty. The motor has a 1 year manufacture warrant

1 Watt Sport Runner LiteBelt $79.95 GMG1002: Features: -Sport Runner LiteBelt. -Color: Sea blue / Grey. -No more uncomfortable headlamps or having to carry a flashlight. -Experience the comfort, stability. -Improved night vision, depth perception, and peripheral vision . -With Go Motion’s innovative body mounted lighting systems. -1 watt SLK setrofits to existing packs. -Designed for hikers and endurance runners. -Who want to use their existing packs when hiking or running in low light conditions. -Mounts to existing shoulder straps at chest level by two velcro straps. -Features include: Hi output 1 watt luxeon led. -With separate battery box, hard wired power cord, beam width adjustment, brightness control. -Angle adjustment for optimum trail use. -3 level beam intensity and flood. -Adjustable beam angle. -Two flashing rear led tail lights (will shine through mesh pockets). -3 AA energizer batteries Included. -Low battery indicator light. -Zip pockets (2) for cell phone / keys and reflective trim. -No assembly required. -Warranty length: 3 months. -Dimensions: 11′ H x 8′ W x 4 D.

1-3/4 HP Fixed Base Router DW616 $136.99 DWT2685: Features: -1-3/4 HP (maximum motor HP), 11 amp motor provides the power to rout smoothly through the toughest hardwoods .-Micro-fine depth adjustment ring provides precise depth adjustments in 1/64 increments and adjusts vertically for a constant switch/cord set location .-Adjustable, tool-free steel motor cam lock makes depth adjustment and base changes and solid-locking .-Quick release motor latches for fast and easy motor pack removal for bit and base changes .-Detachable cord set offers cord set serviceability and the ability to use the same motor pack for all bases .-Sub-base concentrically gauge included to ensure bit concentricity for best-in-class accuracy .-Clear, LEXAN sub-base provides enhanced base durability, bit visibility, and accepts standard template guide bushings .-Rubber over-molded handles and low center of gravity design provide best-in-class comfort, balance, and control .-Dust-sealed switch provides durability and long switch life .-Heavy duty, precision machined, die-cast aluminum base and motor housing for durability and low tool weight .

1.25 1/4 HP Snappy John Submersible Sump Pump – Volts / Cord Length: 115 Volts / 10′ Power Cord $109.24 LGP1032: Automatic, 1/4 HP sump pump. 1.25 FNPT discharge. Includes garden hose adapter and removable inlet screen for easy cleaning. Lifetime oil supply. Pump operates in 7 to 10 depth of water and shuts off at 2 -5 . For use in basement sumps and other general wastewater removal. Complete with 1/4 HP Shaded Pole Motor and 10′ Power Cord or 25′ Power Cord. Features: -Handles up to 3/8 solids -Polycabonate cover, Zinc motor housing, and Polypropylene volute -25′ (7.6m) Maximum Head -Includes Garden Hose Adapter -Automatic operation with built-in snap action float switch -7 -10 (17.8cm-25cm) On-level and 2 -5 (5.1cm-12.7cm) Off-level -Choose from 115 Volt with 25′ Power Cord or 115 Volts with 10′ Power Cord Specifications: -PSI: 10.8 -HP: 4/10 -Hz: 60 -GPM at 5′ of Head: 35′ -Discharge Port: 1.25 5.5 -ASP Specification Sheet

1.5 1/2 HP Big John Submersible Sump Pump – Volts / Cord Length: 115 Volts / 25′ Cord / UL/CSA Certified $452.54 LGP1046: The Big John submersible sump pumps provide efficient, trouble-free service for extended or continuous use in moving large volumes of water. Little Giant’s submersible sump pumps are ideals for use in Excavation, Crawl Space, Basement, Underground Passageway, Loading Docks, Grain Elevator, Construction Site, Cooling Tower, Fire Cleanup and other applications requiring high volume water dispersal. Features: -Cast iron pump housing with protective epoxy coating for corrosion and rust resistance -Oil filled motor housing for lifetime lubrication and rapid heat dissipation -Stainless steel screws, bolts, and handle -Mechanical seals (stainless steel spring, nitrile parts, carbon and ceramic faces) -Nylon switch housing -Thermal overload protection -Automatic model -Automatic operation with pressure switch operates when water level is between 8-1/2 to 12 . Pump shuts off when water level falls to between 1-1/2 – 5 (Pressure switch is non-adjustable) Specifications: -HP: 1/2 HP -Volts: 115 -Hz: 60 -GPM at 5′ of Head: 83′ -Discharge Port: 1.5 -Choose from 115 Volt with 25′ Power Cord or 115 Volts with 10′ Power Cord

1.5 1/2 HP Eliminator Submersible Sump / Effluent Pump $487.12 LGP1012: Specifically engineered to handle the tough demanding tasks for effluent and demanding tasks for wastewater and effluent waste transfer with high efficiency and long term dependability. The Eliminators includes pumps for use in Residential, Commercial, Industrial and Agricultural applications with light to medium transfer demands. For dewatering, effluent waste, wastewater and handling where such materials must be moved upward from a collection area to sewer or septic lines, or drainage areas, the Eliminators are an ideal solution! Features: -Handle liquids and 3/4 diameter solid waste materials -Cast iron pump housing with protective epoxy coating for corrosion and rust resistance -Oil filled motor housing for lifetime lubrication and rapid heat dissipation -Ball bearings upper and lower to handle radial and axial loads -Stainless steel screws, bolts, handle and seal assembly -Mechanical seals (stainless steel spring, nitrile parts, carbon and ceramic faces) -Thermal overload protection -Remote Float Switch with piggyback plug Specifications: -PSI: 10.4 -HP: 1/2 -Hz: 60 -GPM at 5′ of Head: 80 -Max Solids Diameter: 0.75 -Discharge Port: 1.5 -Construction: Cast Iron -Choose from 115 Volt with 10′ Power Cord or 115 Volts with 25′ Power Cord Little Giant Pumps 10E-CIM Series Spec Sheet

1.5 1/3 HP Big John Submersible Sump Pump – GPM / Volts / Cord Length: 46 GPM / 115 Volts / 25′ Power Cord $185.61 LGP1033: For residential and light commercial use, the 1/3 HP automatic submersible sump pump provides efficient and reliable service. Pump has a 1.5 discharge with an 18′ maximum head. Cast iron motor housing is oil-filled for lifetime lubrication and excellent heat dissipation. Polycarbonate cover and polypropylene volute-base. Features: -Screened inlet -Epoxy coated cast iron motor housing for corrosion and rust resistance -Oil filled motor housing for lifetime lubrication and rapid heat dissipation -Stainless steel screws, bolts, and handle -Mechanical seals (stainless steel spring, nitrile parts, carbon and ceramic faces) -Automatic operation with pressure switch operates pump when water level is between 7 and 10 . Pump shuts off when water level falls to between 1 and 4 (Pressure switch is non-adjustable) -Thermal overload protection -With Legs Option:PVC leg kit to lift the pump off the bottom of the basin to help keep the intake screen free of debris Specifications: -PSI: 7.8 -HP: 1/3 -Hz: 60 -GPM at 5′ of Head: 46′ or 2750 (with Legs) -Discharge Port: 1.5 6 Series Spec Sheet

1.5 1/3 HP Big John Submersible Sump Pump – GPM / Volts / Cord Length: 46 GPM / 115 Volts / 8′ Power Cord $147.99 LGP1033: For residential and light commercial use, the 1/3 HP automatic submersible sump pump provides efficient and reliable service. Pump has a 1.5 discharge with an 18′ maximum head. Cast iron motor housing is oil-filled for lifetime lubrication and excellent heat dissipation. Polycarbonate cover and polypropylene volute-base. Features: -Screened inlet -Epoxy coated cast iron motor housing for corrosion and rust resistance -Oil filled motor housing for lifetime lubrication and rapid heat dissipation -Stainless steel screws, bolts, and handle -Mechanical seals (stainless steel spring, nitrile parts, carbon and ceramic faces) -Automatic operation with pressure switch operates pump when water level is between 7 and 10 . Pump shuts off when water level falls to between 1 and 4 (Pressure switch is non-adjustable) -Thermal overload protection -With Legs Option:PVC leg kit to lift the pump off the bottom of the basin to help keep the intake screen free of debris Specifications: -PSI: 7.8 -HP: 1/3 -Hz: 60 -GPM at 5′ of Head: 46′ or 2750 (with Legs) -Discharge Port: 1.5 6 Series Spec Sheet

1.5 1/3 HP Big John Submersible Sump Pump – GPM / Volts / Cord Length: 46 GPM / 115 Volts / 8′ Power Cord $165.75 LGP1033: For residential and light commercial use, the 1/3 HP automatic submersible sump pump provides efficient and reliable service. Pump has a 1.5 discharge with an 18′ maximum head. Cast iron motor housing is oil-filled for lifetime lubrication and excellent heat dissipation. Polycarbonate cover and polypropylene volute-base. Features: -Screened inlet -Epoxy coated cast iron motor housing for corrosion and rust resistance -Oil filled motor housing for lifetime lubrication and rapid heat dissipation -Stainless steel screws, bolts, and handle -Mechanical seals (stainless steel spring, nitrile parts, carbon and ceramic faces) -Automatic operation with pressure switch operates pump when water level is between 7 and 10 . Pump shuts off when water level falls to between 1 and 4 (Pressure switch is non-adjustable) -Thermal overload protection -With Legs Option:PVC leg kit to lift the pump off the bottom of the basin to help keep the intake screen free of debris Specifications: -PSI: 7.8 -HP: 1/3 -Hz: 60 -GPM at 5′ of Head: 46′ or 2750 (with Legs) -Discharge Port: 1.5 6 Series Spec Sheet

1.5 1/3 HP Big John Submersible Sump Pump – GPM / Volts / Cord Length: 46 GPM with Legs / 115 Volts / 8′ Power Cord $153.13 LGP1033: For residential and light commercial use, the 1/3 HP automatic submersible sump pump provides efficient and reliable service. Pump has a 1.5 discharge with an 18′ maximum head. Cast iron motor housing is oil-filled for lifetime lubrication and excellent heat dissipation. Polycarbonate cover and polypropylene volute-base. Features: -Screened inlet -Epoxy coated cast iron motor housing for corrosion and rust resistance -Oil filled motor housing for lifetime lubrication and rapid heat dissipation -Stainless steel screws, bolts, and handle -Mechanical seals (stainless steel spring, nitrile parts, carbon and ceramic faces) -Automatic operation with pressure switch operates pump when water level is between 7 and 10 . Pump shuts off when water level falls to between 1 and 4 (Pressure switch is non-adjustable) -Thermal overload protection -With Legs Option:PVC leg kit to lift the pump off the bottom of the basin to help keep the intake screen free of debris Specifications: -PSI: 7.8 -HP: 1/3 -Hz: 60 -GPM at 5′ of Head: 46′ or 2750 (with Legs) -Discharge Port: 1.5 6 Series Spec Sheet

1.5 1/3 HP Big John Submersible Sump Pump – Volts / Cord Length: 115 Volts / 10′ Power Cord / UL/CSA Cert $154.86 LGP1039: For residential and light commercial use, the 6-CIM-R sump pump provides effiicent and reliable service. Pump features a 1-1/2 discharge with an 18′ maximum head. Cast iron motor housing is oil-filled for lifetime lubrication and rapid heat dissipation. Polycarbonate cover and Polypropylene volute-base. Garden hose adapter included for utility use. Features: -Screened inlet -Epoxy coated cast iron motor housing for corrosion and rust resistance -Oil filled motor housing for lifetime lubrication and rapid heat dissipation -Stainless steel screws, bolts, and handle -Mechanical shaft seal (stainless steel spring, nitrile parts, carbon and ceramic faces). -Manual operation (pump can easily be converted to automatic operation using the RS-5, VDS1006, or RFSN-9) -1-1/2 MNPT x 1-1/4 FNPT (31.7mm) Reducer Bushing -Thermal overload protection Specifications: -HP: 1/3 -Volts: 115 -Hz: 60 -GPM at 5′ of Head: 46′ -Maximum Head: 18′ -PSI: 7.8 -Discharge Port: 1.5 -Choose from 115 Volt with 10′ Power Cord or 115 Volts with 25′ Power Cord 6 Series Spec Sheet

1.5 1/3 HP Big John Submersible Sump Pump – Volts / Cord Length: 115 Volts / 25′ Cord / UL/CSA Cert $163.93 LGP1039: For residential and light commercial use, the 6-CIM-R sump pump provides effiicent and reliable service. Pump features a 1-1/2 discharge with an 18′ maximum head. Cast iron motor housing is oil-filled for lifetime lubrication and rapid heat dissipation. Polycarbonate cover and Polypropylene volute-base. Garden hose adapter included for utility use. Features: -Screened inlet -Epoxy coated cast iron motor housing for corrosion and rust resistance -Oil filled motor housing for lifetime lubrication and rapid heat dissipation -Stainless steel screws, bolts, and handle -Mechanical shaft seal (stainless steel spring, nitrile parts, carbon and ceramic faces). -Manual operation (pump can easily be converted to automatic operation using the RS-5, VDS1006, or RFSN-9) -1-1/2 MNPT x 1-1/4 FNPT (31.7mm) Reducer Bushing -Thermal overload protection Specifications: -HP: 1/3 -Volts: 115 -Hz: 60 -GPM at 5′ of Head: 46′ -Maximum Head: 18′ -PSI: 7.8 -Discharge Port: 1.5 -Choose from 115 Volt with 10′ Power Cord or 115 Volts with 25′ Power Cord 6 Series Spec Sheet

1.5 1/3 HP Drainosaur Water Removal System – Hz / Volts / Cord: 60 Hz / 115 Volts / 8′ Cord $197.66 LGP1030: Includes 3.5-gallon polypropylene tank, tank lid has 1 1/2 FNPT (38.1mm) side intake port, 1 1/2 FNPT (38.1mm) top discharge port, and 2 FNPT (51mm) top vent port. Easy-to-remove filter trap. Also includes 3/10 HP automatic submersible sump pump with 8′ (2.4m) power cord and 3-prong grounded plug; and 1 1/2 (38.1mm) diameter pipe from pump to lid. Basin is IAPMO approved. Features: -Completely assembled and ready to be installed -Intermittent Liquid Temp. up to 125 F -Epoxy coated cast iron housing -Polycarbonate Cover -Polypropylene Volute -Nylon Impeller -Carbon/Ceramic Shaft Seal -Upper and lower bearings -Automatic Operation -Diaphragm switch Activator -Switch on – 4-7 / Switch off – 1-3 Specifications: -HP: 1/3 -Hz: 50/60 or 60 -Tank Size: 3.5 Gallons -GPM at 5′ of Head: 45′ -Maximum Head at 18′ -FNPT Top Vent Port: 2 -Top Discharge Port: 1.5 -Side Discharge Port: 1.5 -Choose from 115 Volt with 8′ Power Cord or 230 Volts with 8′ Power Cord

1.5 1/3 HP TSW Submersible Sump Systems $322.99 LGP1071: The TSW Submersible Sump Pump is an innovative alternative to the traditional submersible sump pumps. This pump features a solid state IntelliSwitch automatic switch and alarm circuit that eliminates the potential hang ups seen with float switches. The alarm portion of the circuitry is built into the IntelliPlug power cord plug. It has an audible alarm and a red warning light to indicate a high water condition in the sump. The IntelliPlug also has a green run light to show the pump is operating. Features: -Includes pump, 22 basin, clear view cover assembly and discharge kit with clear check valve -Pump is UL and CSA certified -Center discharge (1-1/2 NPT) for suspended installation from sump basin cover, to keep pump off the bottom where gravel or other debris are more likely to cause clogging that may result in a flooded basement -Integral IntelliSwitch with no moving parts for the most reliable automatic turn-on and turn-off operation, a high water alarm activation that reduces the potential for mechanical switch malfunction or failure that may result in a flooded basement -Integral IntelliPlug that provides a red, high water alarm light and 85 db buzzer, a push-to silence switch and a green run light to show when pump is running -Bottom screened inlet and a recessed, vortex impeller to reduce the potential for clogging that may result in a flooded basement -Both upper and lower ball bearings for smooth, quiet operation and longer motor life -Mechanical shaft seal provides protection against water entry into the motor -All exposed component parts of the pump are made of corrosion – resistant materials to provide a longer service life -Environmental friendliness in mind: Powerful and efficient 1/3 HP permanent split capacitor motor draws less than 5.0 full load amps, conserving energy while delivering 40 GPM at 10′ total dynamic head Specifications: -PSI: 14.3 -HP: 2 -Hz: 60 -Volts: 115 -GPM at 5′ of Head: 45 -Discharge Port: 1.5 TSW Series Sp

1.5 1/6 HP Drainosaur Jr. Water Removal System $274.3 LGP1027: Includes 5-gallon polypropylene tank, tank lid has 1 1/2 FNPT (38.1mm) side intake port, 1 1/2 FNPT (38.1mm) top discharge port, and 2 FNPT (51mm) top vent port. Easy-to-remove filter trap. Also includes 1/6 HP automatic, 5-ASP submersible sump pump with 10′ (3m) power cord and 3-prong grounded plug; and 1 (25.4mm) diameter pipe from pump to lid. Basin is IAPMO approved. Features: -Completely assembled and ready to be installed -Intermittent Liquid Temperature up to 125 F -Epoxy coated cast aluminum housing -Nylon volute -Nylon impeller -Vitron shaft seal -Automatic operation -Diaphragm switch activator -Switch on – 7.38 / Switch off – 0.75 -10′ power cord -IAPMO Approved Basin Specifications: -HP: 1/6 -Hz: 60 -GPM at 5′ of Head: 15′ -Max Solids Diameter: 1.5 -Top Discharge Port: 1.5 -Side Discharge Port: 1.5 -Discharge Port: 2 -Construction: Cast Iron Little Giant Pumps WRS-5 Series Spec Sheet

1.5 4/10 HP Eliminator Submersible Sump / Effluent Pump – Volts / Cord Length: 115 Volts / 25′ Cord / UL/CSA Certified $292 LGP1007: Specifically engineered to handle the tough demanding tasks for effluent and sewage waste transfer with high efficiency and long term dependability. The Eliminators – USA Series – includes pumps for use in Residential, commercial, Industrial and Agricultural applications with light to medium transfer demands. For dewatering, effluent waste, wastewater and sewage handling where such materials must be moved upward from a collection area to sewer or septic lines, of drainage areas, the Eliminators are an ideal solution. Features: -Handles liquid and solid waste materials up to 3/4 diameter -Cast iron pump housing with protective epoxy coating for corrosion and rust resistance -Oil filled motor housing for lifetime lubrication and rapid heat dissipation -Stainless steel screws, bolts, handle, and seal assembly -Mechanical seals (stainless steel spring, nitrile parts, carbon and ceramic faces) -Thermal overload protection -Manual operation Specifications: – -PSI: 10 -HP: 4/10 -Hz: 60 -GPM at 5′ of Head: 57 -Max Solids Diameter: 0.75 -Discharge Port: 1.5 -Construction: Cast Iron -Choose from 115 Volt with 15′ Power Cord, 115 Volts with 25′ Power Cord or 230 Volts with 20′ Power Cord Little Giant Pumps 9E-CIM Series Spec Sheet

1.5 GR Grey Iron Submersible Pump with 1/3 HP, 115 V Electric Motor – Control Switch: Liquid Level Control Switch $706.99 OTS1219: This Gorman-Rupp submersible pump is designed for pumping out flooded basements, pools, spas, ponds, pits, or anywhere else where the pump can be lowered into the water. The 50-foot power cord allows the pump to be lowered into areas a self-priming pump with a suction hose could not readily access. Powered by a dependable 1/3 HP, 115 V electric motor, this pump can move up to 50 gallons of water per minute. This pump features rugged grey iron construction and Buna-N mechanical seal with carbon and ceramic faces for long life and dependability. Also available is the optional level control 90 wide angle with float switch. Same day shipping for phone orders placed before 2 pm EST Features: -Built-in carry handle -50′ insulated conductor cable -Stainless steel hardware -Buna-N mechanical seal with carbon and ceramic faces -Thermal overload protection -Stainless steel strainer -Optional level control 90 wide angle with float switch Specifications: -HP: 1/3 -VAC/Motor Type: 115V Electric -Port NPT: 1.5 -Construction: Grey Iron -Motor Enclosure: Grey Iron -Max Head: 25 ft. -Max GPM: 50 @ 3,450 RPM -Max PSI: 10.8 -Max Liquid Temperature: 122 degrees F

1.5 GR Grey Iron Submersible Pump with 1/3 HP, 115 V Electric Motor – Control Switch: Standard $557.99 OTS1219: This Gorman-Rupp submersible pump is designed for pumping out flooded basements, pools, spas, ponds, pits, or anywhere else where the pump can be lowered into the water. The 50-foot power cord allows the pump to be lowered into areas a self-priming pump with a suction hose could not readily access. Powered by a dependable 1/3 HP, 115 V electric motor, this pump can move up to 50 gallons of water per minute. This pump features rugged grey iron construction and Buna-N mechanical seal with carbon and ceramic faces for long life and dependability. Also available is the optional level control 90 wide angle with float switch. Same day shipping for phone orders placed before 2 pm EST Features: -Built-in carry handle -50′ insulated conductor cable -Stainless steel hardware -Buna-N mechanical seal with carbon and ceramic faces -Thermal overload protection -Stainless steel strainer -Optional level control 90 wide angle with float switch Specifications: -HP: 1/3 -VAC/Motor Type: 115V Electric -Port NPT: 1.5 -Construction: Grey Iron -Motor Enclosure: Grey Iron -Max Head: 25 ft. -Max GPM: 50 @ 3,450 RPM -Max PSI: 10.8 -Max Liquid Temperature: 122 degrees F

1.5 HP 115 Volt 2 Speed Center Discharge Waterway Spa / Hot Tub Pump 1.5 Plumbing # C15115 $238.29 PLEASE READ: There is no industry standard for Unions. The various brands have their own unique style, which means you must use the unions provided with our spa pump. This will most likely involve cutting off your old unions and installing the new ones shipped with the spa pump. If your heater is directly coupled to the spa wet end, then our pump will probably not work as the union will most likely be different. Be sure to look at the motor voltage, not the voltage supplied to the spa to determine the correct pump voltage. When removing power cord from existing pump we recommend you mark your wires for common , High speed , low speed . The pump does not come with a power cord. The connection diagram for the new pump is located on the motor name plate. The wet ends can be rotated by simply loosening the motor thru bolts and turning the pump head, allowing the discharge to point to 3 O’clock, 9 O’clock or 6 O’clock. Not Self Priming – Water must be above pump head in order to op

1.5 HP 115 Volt 2 Speed Side Discharge Waterway Spa / Hot Tub Pump 1.5 Plumbing # S15115 $238.29 PLEASE READ: There is no industry standard for Unions. The various brands have their own unique style, which means you must use the unions provided with our spa pump. This will most likely involve cutting off your old unions and installing the new ones shipped with the spa pump. If your heater is directly coupled to the spa wet end, then our pump will probably not work as the union will most likely be different. Be sure to look at the motor voltage, not the voltage supplied to the spa to determine the correct pump voltage. When removing power cord from existing pump we recommend you mark your wires for common , High speed , low speed . The pump does not come with a power cord. The connection diagram for the new pump is located on the motor name plate. The wet ends can be rotated by simply loosening the motor thru bolts and turning the pump head, allowing the discharge to point to 3 O’clock, 9 O’clock or 6 O’clock. Not Self Priming – Water must be above pump head in order to op

1.5 HP 2-Speed 3450/1725 RPM, 115 volts Above Ground Pool Pump – Waterway brand – With large Debris Basket & Power Cord # PH2150-6 $209.95 Waterway Above Ground Pool Pumps are manufactured in Oxnard, California. The pump has a large 6 debris basket. It is connected to the pump housing with a union nut, this makes it easy if you need to rotated the head, as the basket can be remounted with no problem once you have rotated the head. Motor is supplied by AO Smith, an industry leader in pool pump motors. Pumps come with a 6 long power cord, with the standard 3 prong plug. This pump is ready to go when you receive it. Simply remove the pump from the box, open the cover on the debris basket, where you will find the gasket that needs to be inserted into the basket nut and then simply install the basket on the face of the pump. Reinstall your hoses from your old pump, connect them to the pool filter and simply plug in the pump. Of course be sure the pump is full of water before you power up the pump so that you do not burn up the pump shaft seal. Pump has a 3 year manufacture warranty. The motor has a 1 year manufacture warrant

1.5 HP 230 Volt 2 Speed Center Discharge Waterway Spa / Hot Tub Pump 1.5 Plumbing # C15230 $238.29 PLEASE READ: There is no industry standard for Unions. The various brands have their own unique style, which means you must use the unions provided with our spa pump. This will most likely involve cutting off your old unions and installing the new ones shipped with the spa pump. If your heater is directly coupled to the spa wet end, then our pump will probably not work as the union will most likely be different. Be sure to look at the motor voltage, not the voltage supplied to the spa to determine the correct pump voltage. When removing power cord from existing pump we recommend you mark your wires for common , High speed , low speed . The pump does not come with a power cord. The connection diagram for the new pump is located on the motor name plate. The wet ends can be rotated by simply loosening the motor thru bolts and turning the pump head, allowing the discharge to point to 3 O’clock, 9 O’clock or 6 O’clock. Not Self Priming – Water must be above pump head in order to op

1.5 HP 230 Volt 2 Speed Side Discharge Waterway Spa / Hot Tub Pump 1.5 Plumbing # S15230 $238.29 PLEASE READ: There is no industry standard for Unions. The various brands have their own unique style, which means you must use the unions provided with our spa pump. This will most likely involve cutting off your old unions and installing the new ones shipped with the spa pump. If your heater is directly coupled to the spa wet end, then our pump will probably not work as the union will most likely be different. Be sure to look at the motor voltage, not the voltage supplied to the spa to determine the correct pump voltage. When removing power cord from existing pump we recommend you mark your wires for common , High speed , low speed . The pump does not come with a power cord. The connection diagram for the new pump is located on the motor name plate. The wet ends can be rotated by simply loosening the motor thru bolts and turning the pump head, allowing the discharge to point to 3 O’clock, 9 O’clock or 6 O’clock. Not Self Priming – Water must be above pump head in order to op

1.5 HP 3450RPM 230 Volts 2 Speed Inground Swimming Pool Pump # E15152SP $486 The Precision Pumps are assembled in our facility in Michigan. Motors are provided by AO Smith Electric, these are brand new motors. The Precision Pump was designed to go head to head with the Hayward Super Pump. The inlets and outlets are in the exact same position as the Super Pump, so new plumbing modification is necessary. Units come shipped wired for 220 volts. Motor wiring diagram is on motor name plate. Pump has 5 year limited warranty, motor has 1 year manufacture warranty. Pump does not come with a 2 speed switch or power cord.

1.5 IPT Electric Submersible Pump with 1/3 HP Motor $358.99 OTS1187: This slim, lightweight CSA listed IPT pump features top discharge as well as thermal overload protection. Fully equipped with cast iron impellers, 304 stainless steel casing, motor housing, shaft and hardware, this IPT Submersible Pump can move up to 50 gallons of water per minute. With a 30-foot power cable, this pump can be placed almost anywhere it’s needed. For optimum results, add the optional Piggyback Mercury-Free Float Switch. The mercury-free liquid level control has a piggyback plug molded into the cord, allowing the submersible pump motor to plug into the cord, and then plug the entire assembly into a standard grounded outlet. This reliable, cost effective, low maintenance IPT Submersible Pump is designed to work with non-flammable liquids which are compatible with pump component materials. Same day shipping for phone orders placed before 2 pm EST Features: -Silicon carbide Viton lubricated lower seal -Carbon ceramic Viton lubricated upper seal -Nitrile O-rings -Overload/thermal breaker Specifications: -Motor HP: 1/3 -Motor Voltage: 115V -Overall Height: 14.5 -Diameter: 6.66 -Discharge Port Size: 1.5 NPT -Max Head: 32 ft. -Delivers Up To: 13.8 PSI -Max Water Flow: 50 GPM -Suction Strainer: 0.39 x0.29 slots on 0.31 staggered centers -Minimum Liquid Height: 3 -CSA Listed Piggyback Float Switch Standard Features: -30-foot 115V/13 Amp cord -Mercury-free -No wiring -Adjustable clamp -Corrosion resistant -Proven reliability -Omni directional -Variable pumping range -Easily installed

1.5 IPT Electric Submersible Pump with 1/3 HP Motor $359.99 OTS1185: This slim, lightweight CSA listed IPT pump features top discharge as well as thermal overload protection. Fully equipped with cast iron impellers, 304 stainless steel casing, motor housing, shaft and hardware, this IPT Submersible Pump can move up to 50 gallons of water per minute. With a 30-foot power cable, this pump can be placed almost anywhere it’s needed. For optimum results, add the optional Piggyback Mercury-Free Float Switch. The mercury-free liquid level control has a piggyback plug molded into the cord, allowing the submersible pump motor to plug into the cord, and then plug the entire assembly into a standard grounded outlet. This reliable, cost effective, low maintenance IPT Submersible Pump is designed to work with non-flammable liquids which are compatible with pump component materials. Same day shipping for phone orders placed before 2 pm EST Features: -Silicon carbide Viton lubricated lower seal -Carbon ceramic Viton lubricated upper seal -Nitrile O-rings -Overload/thermal breaker Specifications: -Motor HP: 1/3 -Motor Voltage: 115V -Overall Height: 14.5 -Diameter: 6.66 -Discharge Port Size: 1.5 NPT -Max Head: 32 ft. -Delivers Up To: 13.8 PSI -Max Water Flow: 50 GPM -Suction Strainer: 0.39 x0.29 slots on 0.31 staggered centers -Minimum Liquid Height: 3 -CSA Listed

1.5 hp 3450RPM Delta Unisaw Electric Motor 115/230 Volts Leeson Electric Motor # 120925 $359.94 Special Mounting: Motor pivots on rod for belt tensioning. Totally enclosed fan cooled motor produces extra high breakdown torques for maximum cutting power. Has 1 long shaft, diameter with keyway. Added 54 cord to all motors. Motor is normally connected for 230volts from the factory. Please double check motor connection before installation. Cat # 120925 replaces Delta UNISAW motor # 83-621. Capacitor Start/induction run. 1 year manufacture warranty.

1.7 GPM / 1,600 PSI Small Quadro Cold Water Electric Pressure Washer $1590.99 KRZ1006: KranzleUSA’s K 399 TST with GFI Small Quadro Cold Water Electric Pressure Washer has a unique design that delivers 20% more cleaning power at tip. It also has the benefit of an auto on/off gun-jet control with 30 second time delay and ground fault interrupter (GFI) which helps prevent against shocks. With these amenities, this pressure washer is perfect for medium industrial duty projects like cleaning your boat or vehicle, food processing, at a hotel or restaurant, or random jobs around the house. This pressure washer is a great size for the do-it-yourself person in your family. Features: -Self Priming: This pressure washer is able to independently pump water from most water sources (buckets, ponds, etc.) and does not require water to be pumped into if from a hose -Pump design gives multi-hour bypass and run-dry capability preventing accidental pump damage and is freeze-proof -Auto on/off gun-jet control with 30 second time delay -Hose reel with 50′ high pressure wire braided hose -Unique design delivers 20% more cleaning power at tip -Dirt Killer nozzle doubles cleaning efficiency -Ground fault interrupter (GFI) prevents shocks -Professional gun-jet lance -50′ wire braided hose on hose reel -Gauge -Safety coupler screw connections -Knife-jet nozzle -Dirt Killer turbo nozzle Applications: -Medium Industrial Duty: -Hotel and building -Restaurant -Food processing -Bath and shower room -Boat or vehicle Specifications: -1,600 PSI -1.7 gallons per minute -Cleaning power: 2,720 -Kranzle APG industrial grade pump with 10 year manifold warranty -Kranzle adjustable pressure unloader -110 volt, 15 amps TEFC electric motor with 35′ cord and ground fault interrupter (GFI) -Steel frame with plastic that stores all accessories -High pressure soap with float tank -Inlet water filter -Shipping weight: 100 lbs -Dimensions: 33 H x 23 W x 14 D

1.7 GPM / 1,600 PSI Space Shuttle Cold Water Electric Pressure Washer (K2017 with GFI) $1370.99 KRZ1027: The Kranzle USA K2017 Space Shuttle Cold Water Electric Pressure Washer comes with the ground fault interrupter which helps prevent shocks. Other special features are the Dirt Killer nozzle which doubles the cleaning efficiency, the Kranzle adjustable pressure unloader, and the steel frame with plastic cover that stores all of the accessories. This pressure washer has exit side chemical injection, a gauge, safety coupler screw connections, and Knife-jet (high pressure wash/soap) nozzle. This is a great pressure washer for the lighter commercial projects like cleaning your boat or washing out the outdoor pool. Features: -Self Priming: This pressure washer is able to independently pump water from most water sources (buckets, ponds, etc.) and does not require water to be pumped into if from a hose -Pump design gives multi-hour bypass and run-dry capability preventing accidental pump damage and is freeze proof -Dirt Killer nozzle doubles cleaning efficiency -Ground fault interrupter (GFI) prevents shocks -Professional gun-jet lance -33′ wire braided hose -Exit side chemical injection -Gauge -Safety coupler screw connections -Knife-jet (high-pressure wash/soap) nozzle -Dirt Killer turbo nozzle Applications: -Light Commercial Duty: -Hotel and buildings -Screen-printing -Home -Pool -Boat or vehicle Specifications: -1,600 PSI -1.7 gallons per minute -Cleaning power: 2,805 -Kranzle APG industrial grade pump with 10 year manifold warranty -Kranzle adjustable pressure unloader -110 volt, 15 amps, TEFC electric motor with 33′ cord and ground fault interrupter (GFI) -Steel frame with plastic cover that stores all accessories -Inlet water filter -Shipping weight: 93 lbs -38 H x 15 W x 15 D

1.7 L Cordless Tea Kettle $36.95 SPT1246: Features: -Quickly heats water for tea, coffee, instant noodles or instant soups. -Lifts cord-free for easy pouring. -Water level indicator. -Brewing temperature display (in Celsius). -Stainless steel housing with plastic water tank. -Concealed heating element. -Automatic shutoff. Specifications: -Capacity: 1.7 L. -Power consumption: 1500W. -Input voltage: 120V / 60hz With 1500 watts of power, this electric kettle quickly heats up to 1.7 liters of water for tea, coffee, instant noodle or instant soup. Designed with a concealed heating element, mineral deposits are kept to a minimum and makes cleaning easier. Unit automatically shuts off when water has boiled. Kettle rotates 360 degrees on the base and lifts cord-free for easy pouring. Also features an anti-scale mesh filter to trap lime and calcium particles, water level indicator and a easy-to-read scale displaying the brewing temperature

1.9 GPM / 2,000 PSI Space Shuttle Cold Water Electric Pressure Washer (K2020) – GFI: K 2000 $1372.79 KRZ1029: If you are looking for a medium duty industrial pressure washer, look no further than the K2020 Space Shuttle Cold Water Electric Pressure Washer. This pressure washer’s design gives multi-hour bypass and run-dry capability preventing accidental pump damage and is freeze proof. It also has a 33′ wire braided hose, gauge, Dirt Killer turbo nozzle, and professional gun-jet lance. You will feel comfortable to know that the Kranzle APG industrial grade pump comes with a ten year manifold warranty. And cleaning is double efficient thanks to the Dirt Killer turbo nozzle. K2000 Space-shuttle comes with the option of having Ground Fault Interrupter (GFI) which helps prevent shocks. Features: -Self Priming: This pressure washer is able to independently pump water from most water sources (buckets, ponds, etc.) and does not require water to be pumped into if from a hose -Has the option of Ground Fault Interrupter (GFI) which prevents shocks -Pump design gives multi-hour bypass and run-dry capability preventing accidental pump damage and is freeze proof -Dirt Killer turbo nozzle doubles cleaning efficiency -Professional gun-jet lance -33′ wire braided hose -Exit side chemical injection -Gauge -Safety coupler screw connections -Knife-jet wash/soap nozzle -Dirt Killer turbo nozzle Applications: -Medium Duty Industrial: -Hotel or restaurant -Food processing -Boat or vehicles -Buildings Specifications: -2,000 PSI -1.9 gallons per minute -Cleaning power: 3,800 -Kranzle APG industrial grade pump with 10 year manifold warranty -Kranzle adjustable pressure unloader -110 volt, 20 amps, TEFC electric motor with 35′ electrical cord -Steel frame with plastic cover capable of storing all accessories -Inlet water filter -Shipping weight: 90 lbs -Dimensions: 38 H x 15 W x 15 D

1.9 GPM / 2,000 PSI Space Shuttle Cold Water Electric Pressure Washer (K2020) – GFI: K 2000 with GFI $1441.79 KRZ1029: If you are looking for a medium duty industrial pressure washer, look no further than the K2020 Space Shuttle Cold Water Electric Pressure Washer. This pressure washer’s design gives multi-hour bypass and run-dry capability preventing accidental pump damage and is freeze proof. It also has a 33′ wire braided hose, gauge, Dirt Killer turbo nozzle, and professional gun-jet lance. You will feel comfortable to know that the Kranzle APG industrial grade pump comes with a ten year manifold warranty. And cleaning is double efficient thanks to the Dirt Killer turbo nozzle. K2000 Space-shuttle comes with the option of having Ground Fault Interrupter (GFI) which helps prevent shocks. Features: -Self Priming: This pressure washer is able to independently pump water from most water sources (buckets, ponds, etc.) and does not require water to be pumped into if from a hose -Has the option of Ground Fault Interrupter (GFI) which prevents shocks -Pump design gives multi-hour bypass and run-dry capability preventing accidental pump damage and is freeze proof -Dirt Killer turbo nozzle doubles cleaning efficiency -Professional gun-jet lance -33′ wire braided hose -Exit side chemical injection -Gauge -Safety coupler screw connections -Knife-jet wash/soap nozzle -Dirt Killer turbo nozzle Applications: -Medium Duty Industrial: -Hotel or restaurant -Food processing -Boat or vehicles -Buildings Specifications: -2,000 PSI -1.9 gallons per minute -Cleaning power: 3,800 -Kranzle APG industrial grade pump with 10 year manifold warranty -Kranzle adjustable pressure unloader -110 volt, 20 amps, TEFC electric motor with 35′ electrical cord -Steel frame with plastic cover capable of storing all accessories -Inlet water filter -Shipping weight: 90 lbs -Dimensions: 38 H x 15 W x 15 D

1.9 GPM / 2,000 PSI Space Shuttle Cold Water Electric Pressure Washer (K2020T w/GFI) $1490.99 KRZ1030: If you are looking for a medium duty industrial pressure washer, look no further than the K2020T Space Shuttle Cold Water Electric Pressure Washer. This pressure washer’s design gives multi-hour bypass and run-dry capability preventing accidental pump damage and is freeze proof. It also has a 33′ wire braided hose, gauge, Dirt Killer turbo nozzle, and professional gun-jet lance. You will feel comfortable to know that the Kranzle APG industrial grade pump comes with a ten year manifold warranty. And cleaning is double efficient thanks to the Dirt Killer turbo nozzle. K2000 Space-shuttle comes with the option of having Ground Fault Interrupter (GFI) which helps prevent shocks. Features: -Self Priming: This pressure washer is able to independently pump water from most water sources (buckets, ponds, etc.) and does not require water to be pumped into if from a hose -Has the option of Ground Fault Interrupter (GFI) which prevents shocks -Pump design gives multi-hour bypass and run-dry capability preventing accidental pump damage and is freeze proof -Dirt Killer turbo nozzle doubles cleaning efficiency -Professional gun-jet lance -33′ wire braided hose -Exit side chemical injection -Gauge -Safety coupler screw connections -Knife-jet wash/soap nozzle -Dirt Killer turbo nozzle Applications: -Medium Duty Industrial: -Hotel or restaurant -Food processing -Boat or vehicles -Buildings Specifications: -2,000 PSI -1.9 gallons per minute -Cleaning power: 3,800 -Kranzle APG industrial grade pump with 10 year manifold warranty -Kranzle adjustable pressure unloader -110 volt, 20 amps, TEFC electric motor with 35′ electrical cord -Steel frame with plastic cover capable of storing all accessories -Inlet water filter -Shipping weight: 90 lbs -Dimensions: 38 H x 15 W x 15 D

1/18 HP 1 Gallon ABS Automatic Condensate Removal Pump $122.45 LGP1172: The company that has always been the forerunner in condensate removal pump design, introduces the new generation VCL Series. Adding features for every installation, with guaranteed serviceability and unmatched reliability, Little Giant Pump Company once again defines state-of-the-art in pump design. Features: – Suitable for High-Efficiency, Gas-Furnace Condensate – Vertical type pump unit – Leakproof, rustproof, ABS plastic tank – ABS motor & tank cover, volute and impeller on VCC – Galvanized steel tank cover and ABS plastic switch cover on VCL Series – Stainless steel shaft – Snap-action switch – 3/8 OD barbed discharge, unless otherwise described – 6′ power cord with 3-prong molded plug – Thermal overload protection – 6′ power cord with 3-pronged plug Specifications: -Item Number: 553206 -Model Number: VCL-24UL -Horsepower 1/18 – Flow 270 GPH @ 1′ of Head – Cord Length 6′ – Shut Off 24 – Voltage 115 – Hertz 60 – Amps 2.5 – Watts 148 VCL-24ULS Series Spec Sheet

1/18 HP 1 Gallon ABS Tank – Type Automatic Condensate Removal Pump – Volts / Hz: 115V / 60Hz $130.96 LGP1164: The company that has always been the forerunner in condensate removal pump design, introduces the new generation VCL Series. Adding features for every installation, with guaranteed serviceability and unmatched reliability, Little Giant Pump Company once again defines state-of-the-art in pump design. Features: -Suitable for High-Efficiency, Gas-Furnace Condensate – Vertical type pump unit – Leakproof, rustproof, ABS plastic tank – ABS motor & tank cover, volute and impeller on VCC – Galvanized steel tank cover and ABS plastic switch cover on VCL Series – Stainless steel shaft – Snap-action switch – 3/8 OD barbed discharge, unless otherwise described – 6′ (1.8m) power cord with 3-prong molded plug – Thermal overload protection Specifications: -Model Number: VCL-24ULS -Item Number – 115V / 60Hz Option: 553201 -Item Number – 230V / 50-60Hz Option: 553211 -Horsepower 1/18 -Flow 270 GPH (15 LPM) @ 1′ of Head -Cord Length 6′ (1.8m) -Shut Off 24 -Voltage 115 or 230 (depending on the model) -Hertz 60 or 50/60 (depending on the model) -Amps 1.15 – Watts 148 VCL-24ULS Series Spec Sheet

1/2 HP Permanent Split Capacitor with 240 Power Cord $283.73 LGP1360: Features: -Sump / effluent pump. -Permanent split capacitor (PSC) motor with thermal overload protection. -Energy saving low amp draw. -Cooler running motor which extends pump life. -Epoxy coated cast iron motor housing. -Vortex impeller. -Solids handling up to 0.5 diameter. -Available in manual or automatic operation with two switch options. -Integral snap action float or piggyback mechanical float. -Providing lower current draw, energy efficiency, improved performance and cooler-running for durability. -In addition to a stainless intake plate, the 10EN also features a cast iron cover on the manual and RF (remote float switch) versions. -2 Years warranty. Specifications: -Engine HP: 1/2. -Flow: 67 GPM @ 60 of head. -Cord length: 240 . -Shut off: 360 . -Voltage: 115V. -Ampere: 8 Amps. -Wattage: 850W. -On level: 7-10 . -Off level: 2-5 . -Dimensions: 10.18 H x 8.39 W x 10.6 D.

1/2 HP Submersible Sewage Pump $319.99 LBY1020: Features: -Pump. -Material: Heavy cast iron construction. -Includes: Piggyback style switches on automatic models, 2 solids-handling ability and a shut-off head. -Sporting a new tough powder coat finish over heavy cast iron housings. -Commercial-grade workhorse for residential and light commercial sewage applications. -Permanently lubricated bearings, stainless steel fasteners and quick-disconnect power cord design make this a favorite choice among plumbing professionals. -Mercury-free wide-angle float with series pump – allows for manual operation of pump separate from switch. -Oil filled, thermally protected motor. -Float cord shall be equipped with a series plug for manual bypass operation. -2-Vane semi-open, corrosion resistant hytrel impeller. -120 Cord standard. -2-Year warranty. Specifications: -Engine HP: 1/2. -Discharge: 2 FNPT. -Maximum head: 300 . -112 GPM at 120 TDH. -115 Volts / 1 Phase / 12 Amps. -Maximum fluid temperature: 140 F. -Dimensions: 14 H x 11 1/2 W.

1/2 Magnum Drills – 1/2 drill 850 rpm $186.99 MWK2731: This item features: -Removable brush cartridge system, change brushes in less than 1 minute. -Aluminum gear case and diaphragm supplies greater support for shaft and bearings. -Trigger speed control reversing switches. -Quik-Lok cord for quick detachment from tool. -All ball and roller bearings. -Helical cut, heat-treated gears. -2-finger trigger switch. -Variable speed/reversing. -All metal gear case and diaphragm. -360 positive lock side handle. -Modular brush card design. -Grounded. -Ergonomic tactile grip on handle and motor housing. -All metal Grip-Lok keyless chucks. -Chuck Size: 1/2 in. -Voltage: 120.00 VAC. -Cutting Cap.: 1/2 in (steel) [Max]. -Spindle Thread: 1/2 in – 20. -Control Type: Electronic Variable. -Handle Type: Pistol Grip/Side Rod. -Type: Straight Drill. -Price is for 1 Each. Testing and approvals: -Complies with OSHA and UL requirements. Model Code #160; #160;Model Description AAChuck Type:Keyed, Amps:5.50 A, Speed:0 rpm [Min], 600 rpm [Max], Length:10 1/2 in, Cord Length:8 ft, Drive Gearing:Helical Gearing, Includes:3-Wire Quik-Lok Cord, Chuck, Chuck Key, Rubber Flex Key Holder, Side Handle, Power Source:Electric, Wt.:4.80 lb ABChuck Type:Keyed, Amps:5.50 A, Speed:0 rpm [Min], 850 rpm [Max], Length:10 1/2 in, Cord Length:8 ft, Drive Gearing:Helical Gearing, Includes:3-Wire Quik-Lok Cord, Chuck, Chuck Key, Rubber Flex Key Holder, Side Handle, Power Source:Electric, Wt.:4.80 lb ACChuck Type:Keyed, Amps:8.00 A, Speed:0 rpm [Min], 850 rpm [Max], Length:12 13/64 in, Includes:360 Side Handle, Chuck, Chuck Key, Rubber Flex Key Holder, Wt.:5.40 lb ADChuck Type:Keyed, Amps:8.00 A, Speed:0 rpm [Min], 850 rpm [Max], Length:12 13/64 in, Includes:360 Side Handle, Chuck, Chuck Key, Rubber Flex Key Holder, Wt.:5.40 lb AEChuck Type:Keyless, Amps:8.00 A, Speed:0 rpm [Min], 850 rpm [Max], Length:12 1/4 in, Cord Length:8 ft, Includes:360 Side Handle, 3-Wire Quik-Lok Cord, Single Sleeve All Metal Chuck, Wt.:5.60 lb